PINK/BLACK WITH ADHESIVE HYDBOND LEATHERETTE SHEET (12"x24") STANDARD
PINK/BLACK WITH ADHESIVE HYDBOND LEATHERETTE SHEET (12"x24") STANDARD
131 in stock
Our 12" x 24" Hydbond leatherette sheets are specifically designed for laser engraving and cutting.
This laser-safe sheet features Industry-standard Hydbond adhesive backing for a reliable and secure attachment to hats and other apparel related projects. It is perfect for producing quality laser engravings and cuts for a wide variety of applications. The material is highly resistant to wear and tear, guaranteeing excellent results.
Hydbond Leatherette Specifications
Hydbond Leatherette Specifications
SIZE:
12" x 24" per panel
THICKNESS:
Approximately 1.45mm
BACKING:
These Leatherette sheets come pre-applied with our industry leading Hydbond adhesive.
(Heat activated adhesive)
Prior to applying this material to your garment, ensure that you have removed the white paper transfer.
You CAN remove the white paper transfer before or after you laser engrave & cut your patches.
Note: Non-tacky until heated
TEXTURE:
Real leather duplicated to achieve a heightened sense of authenticity.
MATERIAL:
Non-toxic faux leather designed & manufactured specifically for laser engraving
LAYERS:
The surface layer is composed of the color of the leather you perceive, reinforced by a specific fabric to increase its thickness.
When engraving, the color beneath will be revealed.
The durable gray backing material used in our leatherette provides long-lasting support.
Note:
Rawhide/black will laser black
Black/Silver will laser silver
Share
Hydbond Instructions
Download our instructions here!
https://cdn.shopify.com/s/files/1/0641/8310/7806/files/Hydbond_Instuctions.pdf?v=1720543392Let customers speak for us
from 613 reviewsWorked exactly as I hoped it would. Will definitely buy more.
Very pleased with the leatherette sheets and premade patches with stitching that I ordered. Very high quality product. Laser engraves and cuts very well. The backing adhesive is of superior quality. You don't have to worry about them peeling off like many of the cheaper products out there. I will always turn to Hydbond for my future projects!!
All products have been extreme high quality compared to other brands. The service is also top notch! We had several questions on the product since we were new to the line and Noah assisted us with everything! I would highly recommend giving them a try, we will be long time customers.
I like this so far waiting to see if it will pull away as time goes by
Ordered a piece of brush copper for my first hat design and the results were amazing. Easy to laser and adhere to the hat. I highly recommend this color.
good quality!!!!
1st time using Hydbond and I’ve been impressed with how it engraves and cooks.
Leatherette came packed well and organized. Engraves beautifully!
BLACK/GOLD WITH ADHESIVE HYDBOND LEATHERETTE SHEET (12"x24")
Awesome quality. Love their products. I had an item missing from my order, and they promptly sent me a replacement. I would definitely recommend them, and I will be ordering from them again.
Great new products and colors first tests are they look great on hats.
the product is awesome! But I'm getting tired of paying $70 brokerage fees on top of the shipping fees every time I order your products :(
Quick delivery and works great on a diode laser
Excellent product excellent customer service could not ask for more out of a company
Very nice product. Cuts extremely clean and shows a nice black contrast. Will purchase again
Collapsible content
Dual Heated Hat Press Settings
To achieve optimal results, make sure the bottom platen is set to 320°F and the top platen is set to 280°F.
The pressure should be moderate.
Press for 35 seconds.
Note: Press down on your leatherette patch for a few seconds allowing it to stick and stay in place
Top Heated Only Hat Press Settings
For users with a hat press that is only heated from the top, we have the perfect settings for you!
1. Set your hat press to 300°F.
2. Pre-Press your hat for 25-30 seconds.
3. Place your patch on the hat immediately after the pre-press & apply enough pressure for the patch to stay in place while the hat is hot.
4. Again, press the patch for 30 more seconds at medium pressure. Make sure to use a heat resistant cover pad over the patch to prevent scorching of the hat/patch.
Household Iron or Cricut hat press Compatible
Houshold Iron
When applying the patch, use a moderate to high heat setting and apply mild pressure while moving around the patch for 30 to 45 seconds.
Cricut Hat Press
300°F for 50 seconds while applying medium pressure.
Laser Compatibility & Settings
Most lasers should be compatible with Hydbond leatherette as long as the wattage is 10W or higher.
This includes the following manufactures just to name a few. Epilog, Trotec, X-Tool, Thunder, OM-TECH, Full spectrum, etc.
LASER SETTINGS
Due to the multitude of laser manufacturers and the varying wattages available, it can be quite challenging to provide accurate settings tailored to your specific laser. We recommend conducting a series of experiments using a small piece of our leatherette in order to find the optimal settings for your laser.
Leatherette Cleaning
Hydbond Leatherette should be cleaned with a product called LA AWESOME.
LA AWESOME, a non-toxic degreaser is the perfect choice for those seeking an effective solution for business or home use.
To ensure optimal results and preserve the quality of your engravings, begin by spraying a small quantity on a microfiber cloth and softly wiping the leatherette surface to eliminate any char or residue caused by the burning of your laser. You can repeat this process until most, if not all char is removed.
Note: During this process, it is essential to maintain a slight and uniform pressure.
Washing
Hand wash is always our first recommended method.
Wash with soap and water, avoid scrubbing on the patch to preserve engravings.
Noah's Recommendations & Tips
Hey there! This is Noah with Hydbond. Owner & Founder
Thank you for your interest in our leatherette. Our leatherette is extremely easy to work with, so if you are a beginner in the industry or an expert looking to add leatherette to your line of work, you've came to the right place!
Working with our Metallic Leatherette (Black/Silver, Blue/Silver)
Metallics can be hard to work with your first time, but trust me. It's all in the Laser settings! It takes VERY little power in order to reveal the metallic color underneath so keep that in mind when you are trying to dial in your settings. Also, ensure your focus is spot on. It's essential to keep your leatherette as flat as possible while engraving. Any part of your laser lens out of focus, will make a significant impact on the quality of your engravings.
Cleaning
I've been using LA AWESOME as a cleaner for quite some time and it works fantastic! Just make sure not to rub too hard as you can lift some of the color off of the leatherette.
Beginner tips
Make sure to grab a heat resistant silicone or foam pad. You will use these a lot. Place it over your patch right before you press to avoid scorching & patch contamination.
To maintain a flat surface on your laser bed, you CAN remove the paper transfer before engraving. If you decide to do this, ensure that you wipe the glue side with a damp microfiber towel before pressing your patch to remove any dust or debris contamination.
If you ever have any questions, feel free to contact us at any time. My team and I would love to assist!😊 Send us a chat in the box to the right of your screen for quick help!