Hydbond Leatherette Dual Heat Hat Press Settings

To achieve optimal results, make sure the bottom platen is set to 320°F and the top platen is set to 280°F.The pressure should be moderate between 5-7 when using a hotronix 360.Press for 35 seconds.Note: Apply downward pressure on your leatherette patch for a few seconds to help hold it in place before pressing. This will minimize the chance for patch movement during the press.

Real Leather Dual Heat Hat Press Settings

To achieve optimal results, make sure the bottom platen is set to 320°F and the top platen is set to 280°F.The pressure should be moderate between 5-7 when using a Hotronix 360.Press for 45 seconds.Note: Apply downward pressure on your leather patch for a few seconds to help hold it in place before pressing. This will minimize the chance for patch movement during the press.

What is the difference between our UltraHyd Leatherette and our standard Leatherette?

The Difference Between UltraHyd and Standard Hydbond LeatheretteWhile both UltraHyd and standard Hydbond Leatherette offer exceptional performance, there are a few key differences that set them apart:ThicknessUltraHyd Leatherette is significantly thicker than the standard version, providing a more substantial feel and increased durability.BackingUltraHyd features a black felt backing for maximum bond strength, while the standard Hydbond Leatherette has a smooth gray backing.Laser CompatibilityOur Standard & UltraHyd Leatherette is highly compatible with ALL CO2 and fiber lasers, making both a great choice for laser cutting and engraving. Standard Leatherette is recommended if you are running a 30 WATT Laser or below. UltraHyd Leatherette may require more power with cutting to achieve the best results, so it is best to have at least a 40WATT laser when using UltraHyd.VersatilityBoth products are machine washable, but the increased thickness of UltraHyd Leatherette makes it a better choice for heavier-duty applications, such as bags, jackets, and upholstery.So, whether you're looking for a durable, long-lasting leatherette for your next project or a material that excels at laser cutting and engraving, Hydbond has you covered. Explore the full range of our products and find the perfect solution for your needs.

How long will it take to receive my order?

Get your Hydbond rolls shipped out today if you purchase them alone!For Hydbond rolls with Leatherette or just Hydbond Leatherette by itself, we'll send your order within 1-3 business days from our facility.Expect your package to arrive at your door within 1-5 business days once shipped.Note:(If you place an order up to 10 sheets* before 11AM PACIFIC TIME - then it's usually same day shipping)Thread Leather Patches & Larger orders may take up to 3 business days to ship.

How to track my order?

Please track your order at our tracking page for live & detailed updates: https://hydbond.com/apps/liveTrackYou can also track it using thes links.USPS: https://tools.usps.com/go/TrackConfirmAction_inputUPS: https://www.ups.com/track?loc=en_US&requester=ST/

Do you ship internationally?

Yes, we do ship internationally. The shipping fee may vary depending on your location.

I never got my order, what to do?

Track your order from our tracking page to check for potential delays and other explanations. Please note that we have no control over the package once it leaves our facility. Most orders will be delivered in 1-5 business days depending on your location once shipped!If all else fails, feel free to give us a call at 209-854-7736 and we'll gladly assist you!

Vevor or other Top Heated Hat Press Settings

For users with a hat press that is only heated from the top, we have the perfect settings for you!1. Set your hat press to 300°F.2. Pre-Press your hat for 25-30 seconds.3. Place your patch on the hat immediately after the pre-press & apply enough pressure for the patch to stay in place while the hat is hot.Press again at the same temperature for 30-35 seconds.

Cricut Hat Press300°F for 50 seconds while applying medium pressure.Note:Remember to place a heat-resistant pad between your iron and the patch to prevent any burning or scorching.

Houshold IronWhen applying the patch, use a moderate to high heat setting and apply mild pressure while moving around the patch for 30 to 45 seconds.

SIZE:12" x 24" per panelTHICKNESS:Approximately 1.45mmBACKING:These Leatherette sheets come pre-applied with our industry leading Hydbond adhesive.(Heat activated adhesive)Prior to applying this material to your garment, ensure that you have removed the white paper transfer.You CAN remove the white paper transfer before or after you laser engrave & cut your patches.Note: Non-tacky until heatedTEXTURE:Real leather duplicated to achieve a heightened sense of authenticity.MATERIAL:Non-toxic faux leather designed & manufactured specifically for laser engravingLAYERS:The surface layer is composed of the color of the leather you perceive, reinforced by a specific fabric to increase its thickness.When engraving, the color beneath will be revealed.The durable gray backing material used in our leatherette provides long-lasting support.Note:Rawhide/black will laser blackBlack/Silver will laser silver

How do I clean my leatherette?

Hydbond Leatherette should be cleaned with a product called LA AWESOME.LA AWESOME, a non-toxic degreaser is the perfect choice for those seeking an effective solution for business or home use.To ensure optimal results and preserve the quality of your engravings, begin by spraying a small quantity on a microfiber cloth and softly wiping the leatherette surface to eliminate any char or residue caused by the burning of your laser. You can repeat this process until most, if not all char is removed.Note: During this process, it is essential to maintain a slight and uniform pressure.

Hand wash is always our first recommended method.Wash with soap and water, avoid scrubbing on the patch to preserve engravings.

How do I engrave Hydbond Metallic Leatherette?

Working with our Metallic Leatherette (Black/Silver, Blue/Silver, Rustic/Gold, White/Gold, Etc.)Metallics can be hard to work with your first time, but trust me. It's all in the Laser settings! It takes VERY little power in order to reveal the metallic color underneath so keep that in mind when you are trying to dial in your settings. Also, ensure your focus is spot on. It's essential to keep your leatherette as flat as possible while engraving. Any part of your laser lens out of focus, will make a significant impact on the quality of your engravings.

What do I use to cover my patch before pressing?

Make sure to grab a heat resistant silicone or foam pad. You will use these a lot. Place it over your patch right before you press to avoid scorching & patch contamination.

How can I help keep my Hydbond Leatherette flat & in focus?

To maintain a flat surface on your laser bed, you CAN remove the paper transfer before engraving. If you decide to do this, ensure that you wipe the glue side with a damp microfiber towel before pressing your patch to remove any dust or debris contamination.